Conveyor Belt

Conveyor belt specifications and models

2, conveyor belt according to the use of the environment and requirements are divided into many different specifications and models:
1. According to the size of traffic divided by the width: B200 B300 B400 B500 B600 B650 B800 B1000 B1200 B1400 B1600B1800 B2000 and other commonly used models (B on behalf of a wide
Degrees, the unit is mm).
2. According to the different use of the environment is divided into ordinary belt also include (common type, heat-resistant type, flame type, anti-burning type, acid type, oil type), heat-resistant conveyor belt, cold conveyor belt, acid -
Alkali conveyor belt, oil resistant conveyor belt, food conveyor models. One common conveyor belt conveyor belt is covered with plastic food and a minimum thickness of 3.0mm, under the plastic cover a minimum of 1.5mm; heat input
Send band, cold conveyor belt, acid and alkali conveyor belt, oil resistant conveyor belt is covered with a minimum thickness of plastic 4.5mm, under the plastic cover a minimum of 2.0mm. According to the specific circumstances of use of the environment can be
1.5mm to increase the thickness of the upper and lower plastic cover.
3. In accordance with conveyor belt fabric layer of tensile strength is divided into ordinary conveyor belt strength. Strong-type nylon canvas conveyor belt is divided into (NN conveyor belt) and polyester conveyor belt (EP conveyor
Band).
Supplementary Note: Belt of the strong layer of strong polyester canvas (EP), is also divided into EP100-type, EP150-type, EP200-type, EP250, EP300-type, EP350-type, EP400-type, etc.; also can be nylon canvas (NN) , can be divided into NN100, NN150, NN200, NN250, NN300, NN350, NN400, NN450, NN500-type and so on.
⑴, common conveyer belt (including high-tenacity nylon belt) product implementation of the GB7984-2001 standard.
General Conveyor Belt:
Coating: tensile strength of not less than 15Mpa, tensile elongation of not less than 350%, wear volume of ≤ 200mm3, longitudinal sample of interlayer adhesion strength between layers is not less than the average cloth 3.2N/mm, cover the plastic with fabric layer is not less than 2.1 N / mm
Full-thickness longitudinal elongation at break of not less than 10%, full-thickness longitudinal reference edge elongation of not more than 1.5%
Nylon (NN), polyester (EP) Conveyor Belt:
Coating: tensile strength of not less than 15Mpa, tensile elongation of not less than 350%, wear volume ≤ 200mm3
Longitudinal sample of interlayer adhesion strength between layers is not less than the average cloth 4.5N/mm, plastic and fabric covering layer is not less than 3.2 N / mm
Full-thickness longitudinal elongation at break of not less than 10%, full-thickness longitudinal reference edge elongation of not more than 4%
⑵, 3-resistant conveyor belt (heat, acid and alkali) product implementation of the HG2297-92 standard.
⑶, flame-retardant conveyor belt product implementation MT147-95 standard.
(4), corrugated sidewall conveyor belt with corrugated wall is a common conveyor belt on the skirt on the curing of the diaphragm to form a new type of conveyor belt for the wavy wall. Skirts so high there are 80,100,120,160,200,240,300 specifications, a high degree of diaphragm height slightly lower than the skirt. Skirts are S-shaped and W-shaped, clapboard with T-, C-shaped three kinds of shape and TC.