↓ Archives ↓
October 20th, 2009 • 07:10

Conveyor belt bonding method

My company recommends conveyor bonding method using hot-glue bonding, in the middle need to paste rubber core, each level can only have a layer of cloth, the joint operation of the direction to the direction along the conveyor belts.

Wire with a middle longitudinal tear 14-15 meters, how to mend it?

Can be damaged plastic cover all the upper and lower parts of the strip (length beyond the damaged part of the 50-100mm, width of the damaged part of the more than 30-50mm), at the same time to take a position with the same size as the rubber strip (preferably with a layer of fabric layers), and then In accordance with cold-glue method of repair can be.

Hot glue stripping head means (one end of the side to remove gum is good)?
This is another bonding method, this method is also possible, but if we adopt this approach, we should note the following:
a, must be sealed with glue;
b, edge position relative to the transfer of plastic parts must be connected through vulcanized rubber;
c, rubber connecting parts must be polished
Shortcomings, if not handled properly, while easy to damage plastic parts.

References http://www.cnconveyorbelts.com

3 Comments

Ping RSS

  • Aug 30th 2010 • 18:08
    by Dark Comedy

    I totally agree using the above comment, the internet is having a doubt growing into one of the most essential medium of communication across the globe and its due to websites like this that suggestions are spreading so rapidly.

  • Aug 31st 2010 • 06:08
    by African American Movies On DVD

    Took me time to study all the comments, but I truly loved the article. It proved to be Really useful to me and I’m certain to all of the commenters right here! It’s usually nice when you can not only be informed, but additionally entertained! I’m sure you had enjoyable writing this post.

  • Aug 31st 2010 • 10:08
    by Forex Education

    You might haven’t intended to do so, but I think you have managed to express the state of mind that lots of individuals are in. The sense of wanting to help, but not knowing how or wherever, is something a lot of us are going via.

    • Leave a Reply