Conveyor Belt

1, conveyor belt in the transport and storage, should be kept clean to avoid direct sunlight or rain and snow soaked pouring, to prevent acid, alkali, oils, organic solvents and other materials in contact and one meter away from the heating device.
     2, or storage warehouse should maintain a temperature of 18-40 ℃, relative humidity should remain at 50 – 80% between.
     3, storage period, the products have to be placed into a roll, not fold, place to be on a quarterly basis during the flip once.
     4, different types, specifications layers of the conveyor belt should not be together, then use the connector preferably bonding method.
     5, transmission belt of the type, structure, size, number of storeys should be based on reasonable selection of conditions of use.
     6, conveyor belt speed generally not suitable for more than 2. 5 m / s, block degree, wear resistance of materials and the use of large fixed-pear
        Discharging device should be used low.
     7, transport of the driving pulley diameter and belt fabric layer of the relationship between the driving pulley, bend the supporting roller and the idler groove angle
        The requirements of transport aircraft design requirements should be based on reasonable selection.
     8, cis-feeding should be oriented towards the direction of tape, in order to reduce the material impact of the whereabouts of the tape should be adopted chute, reducing the material drop from the
     Apart; tape material section should be shortened by the idler roller spacing and use of buffer material for the drain, with a modest response to block use of soft material board, so as to avoid
     File PLATE perfect, scratch the conveyor belt surface.
     9, conveyor belt in use should pay attention to the following items:
     ① to avoid roller covered by material, resulting in rotation ineffective to prevent the leakage in the drum and the tape is expected between the card and pay attention to the activities of some of the lubrication,
     But not oil conveying belt;
     ② to avoid the on-load start-up;
     ③ tape Deviation occurs, the application to take measures to correct;
     ④ found that partial loss rayon tape patch application in order to avoid the expansion;