Hot and cold conveyor belts curing adhesive joint head comparison of
Conveyor environmental requirements: hot glued to the weather conditions not ask for much, if not the rain you can work around the clock. Humidity less than zero or greater than 80% can not be cold-stick operation. Thermal bonding site should be 380V (220V) power supply, cold-stick can do without.
Conveyor belt of raw materials: hot glue supply-side access is provided by the use of mortar and film, because a better understanding of their characters, easy to guarantee the quality of bonding. Neoprene adhesive used in commercially available cold syrup, its more stringent storage conditions, storage, failure will seriously affect the quality of bonding.
Bonding Quality: Thermal bonding of the Cold Resistant Conveyor Belt interface completely closed, less susceptible to water, wet, cold adhesive on the contrary, the cold wet sticky rubber conveyor belt does not apply and the material temperature requirements. Hot-bonding process is relatively complex and demanding for personnel; cold bonding process can be simple and short-term training posts
. Adhesive joints (hot and cold) Power up to 80-90%; mechanical joint strength only up to 60-65%.
Heat curing machine conveyor belt use: structure: electric heating plate 2, pressure plate 1, I-beam two, large bolts 2, water tanks 1, the voltage of 380V (220V) a set of auxiliary devices.Flame Resistant Conveyor Belt