Archive → November, 2010
Maintenance of heat-resistant conveyor belt
Conveyor belt in the use and preservation, should be kept clean to avoid direct sunlight or rain and snow soaked shower, prevent acid, alkali, oils, organic solvents and other substances in contact, and one meter away from the heating device.
Save storage temperature should remain at 18-40 ℃, relative humidity should be maintained at 50 – 80%.
During storage, the conveyor belt to be placed into a roll, not folded, place the period shall be turned over once every quarter.
Different types, specifications should not be connected together layers of conveyor belt use, the connector preferably bonding method.
Conveyor type, structure, size, number of layers should be based on reasonable selection of conditions of use.
Conveyor belt speed generally not more than 2.5 m / s, block degree, abrasive materials and the use of large fixed slow unloading device should be adopted.
Conveyor belt drive drum diameter and the relationship between fabric layers, drive roller, bend the supporting roller and the roller groove angle of the requirements should be based on the design of conveyor provides a reasonable selection.
Conveyor belt feeding direction should run along the direction of the material to reduce the impact of the whereabouts of the conveyor chute should be adopted, reducing the material falling distance; conveyor belt feeding section should be shortened by the distance between rollers and the rollers used to drain the buffer material with an appropriate response to the block of soft material plate, so as not to stall plate mark, scratch the surface of the conveyor belt.
Improve the efficiency of heat-resistant conveyor belt method
Product:Heat Resistant Conveyor Belt
1, the conveyor belt drive pulley diameter and the relationship between fabric layers, the drive roller, bend the supporting roller and the roller groove angle of the transport requirements of the design requirements should be based on reasonable selection.
2, conveyor belt feeding direction should run along the direction of the whereabouts of the material to reduce the impact of the conveyor chute should be adopted, reducing the distance gap materials; conveyor belt by the material section, should be shortened and the use of the buffer distance between rollers of roller for the leakage, belt conform to appropriate block of soft material plate, so as not to stall plate mark, scratch the surface of the conveyor belt.
3, to prevent the conveyor belt load to start.
4, the conveyor belt deviation occurs, it is timely to take measures to correct it.
6, the conveyor belt of the type, structure, size, number of storeys shall use reasonable choice.
7, the conveyor belt speed generally not more than 2.5m / s, block degree, abrasive materials and the use of large fixed-pear low discharge devices should be used.
8, the conveyor in use, the lack of any roller is necessary to add and repair; roller covered by material, resulting in rotation not working, to prevent leakage of material between the cards in the drum and the belt, pay attention to the lubrication of conveyor belt moving parts, but not oil belt.
9, to avoid the conveyor belt being rack, post or block material block to prevent the misfortune to scratch the rip, when the local damage that conveyor belt, rayon and timely application of patches, so as not to expand.
Oil Resistant Conveyor Belt
Summary: oil conveyor belt by a cotton canvas, nylon canvas, polyester canvas, after rolling, forming, curing and other refining processes, with good oil resistance, suitable for conveying oily materials, and some may be oily, chemical solvent occasions.
Details:
Uses: General conveyor belt on a variety of oils, organic solvent tolerance of the relatively poor. Transport of materials like oil, because oil on the rubber band with a decent swelling, erosion, making the surface of plastic volume increase, structural relaxation, physical and mechanical properties decreased, shortened product life. Oil resistant conveyor belt from the cotton canvas, nylon canvas, polyester canvas, after rolling, forming, curing and other refining processes, with good oil resistance, suitable for conveying oily materials, and some may be oily, chemical solvents occasions use.
Features: plastic cover used good oil resistance of nitrile rubber, reinforced materials can be selected according to the different needs of different materials.
Plastic cover with high acrylonitrile content of nitrile rubber as the main material, the use of canvas, nylon canvas or polyester canvas is a strong layer. Transmission oil for various work materials or exposure to the oil environment. Have low specific volume change, strength to maintain a high, the use of a wide range of advantages.
Oil resistant conveyor belt cover rubber mechanical properties:
Index Name Index
Hardness (Shore A) 6 ± 5 degrees
Abrasion / 1.6cm, ≤ 1.20
Tensile strength Mpa ≥ 10.0
Elongation at break% ≤ 300
Oil volume change rate% ≤ (50 ℃, 24h20 # 10 Aviation Lubricants
Indicate: 1, oil belt is divided into ordinary cotton canvas oil belt, strong oil belt.
2, with a core material: cotton canvas, nylon (NN) canvas, polyester (EP) canvas
3, the thickness of plastic cover: face is a 1.5-8mm, non-face 0-4.5mm
4, cloth layers :2-8
5, bandwidth :200-2200mmOil Resistant Conveyor Belt
Summary: oil conveyor belt by a cotton canvas, nylon canvas, polyester canvas, after rolling, forming, curing and other refining processes, with good oil resistance, suitable for conveying oily materials, and some may be oily, chemical solvent occasions.
Details:
Uses: General conveyor belt on a variety of oils, organic solvent tolerance of the relatively poor. Transport of materials like oil, because oil on the rubber band with a decent swelling, erosion, making the surface of plastic volume increase, structural relaxation, physical and mechanical properties decreased, shortened product life. Oil resistant conveyor belt from the cotton canvas, nylon canvas, polyester canvas, after rolling, forming, curing and other refining processes, with good oil resistance, suitable for conveying oily materials, and some may be oily, chemical solvents occasions use.
Features: plastic cover used good oil resistance of nitrile rubber, reinforced materials can be selected according to the different needs of different materials.
Plastic cover with high acrylonitrile content of nitrile rubber as the main material, the use of canvas, nylon canvas or polyester canvas is a strong layer. Transmission oil for various work materials or exposure to the oil environment. Have low specific volume change, strength to maintain a high, the use of a wide range of advantages.
Oil resistant conveyor belt cover rubber mechanical properties:
Index Name Index
Hardness (Shore A) 6 ± 5 degrees
Abrasion / 1.6cm, ≤ 1.20
Tensile strength Mpa ≥ 10.0
Elongation at break% ≤ 300
Oil volume change rate% ≤ (50 ℃, 24h20 # 10 Aviation Lubricants
Indicate: 1, oil belt is divided into ordinary cotton canvas oil belt, strong oil belt.
2, with a core material: cotton canvas, nylon (NN) canvas, polyester (EP) canvas
3, the thickness of plastic cover: face is a 1.5-8mm, non-face 0-4.5mm
4, cloth layers :2-8
5, bandwidth :200-2200mm
Recent Comments