Conveyor Belt

Conveyor belt covering rubber and rubber buffer for knowledge-Sealand Industry CO.,LTD.

In the Conveyor Belt production process, to use some glue, such as covering the adhesive, rubber buffer layer of cloth, wipe glue. The following Fuchuan to introduce to you on a conveyer belt production process is more important two: covering the adhesive, rubber buffer for knowledge.

Conveyor belt rubber covered. The conveyor belt working environment, it will often be the material impact, abrasion and erosion of the microorganism, but also bear the aging damage. The conveyor belt covering the adhesive has high requirement. First of all, covering the adhesive has good tensile strength and wear resistance, aging resistance, resistance to biological attack. In addition to good stickiness process performance, formulation design key points are as follows: mainly natural rubber or with just the right amount of styrene butadiene rubber. Vulcanization system using sulfur, traditional coordination system of accelerator. Softeners often use a variety of oil, heavy oil, pine tar, Ko Mata resin and petroleum resin. Conveyor belt rubber buffer. Conveyor Belt rubber buffer in covering the adhesive and the belt core layer between the two, can increase the adhesive force, and can absorb and scatter the material impact, with buffer function. Requires glue has good adhesion, and adhesion of adhesive cloth best≥ 3.15N/mm, flexibility, heat small, good heat dissipation, good processing properties. Rubber general use of natural rubber and butadiene rubber and. Vulcanization system should use low sulfur complexes, in order to improve the adhesive layer and the cloth layer adhesion.

                               Steel Mesh Conveyor Belt

The above is the Conveyor Belt two kinds of glue that is covering the adhesive and the cushion rubber introduction.

Sealand Industry CO.,LTD.   http://www.cnconveyorbelts.com/