Conveyor belt of several wear-Sealand Industry CO.,LTD.
The Conveyor Belt will be because of some wear and reduce the service life. In belt conveyor, conveyor belt conveyor components with friction. Next, Fuchuan will take you to know which components will be and the conveying belt to generate friction.
And the conveyor belt friction there are several components, namely the machine frame, guide chute baffle, roller, sweeper. In 1, the frame and the conveying belt friction. Conveyor belt conveyor is due to manufacturing, installation, using and other defects, and run off. When the deviation is excessive, the conveying belt and the roller support frame, caused by the contact edge rubber wear and even make the conveyor belt flanging. In 2, the guide material groove baffle and conveyor belt friction. Baffle on the conveyor belt wear is a kind of special wear, such as on the baffle design improvement method and pay attention to maintenance, it almost can prevent wear. 3, supporting roller and the conveyor belt friction. The lower cover rubber conveyor belt are self-aligning roller and anteversion trough idler friction, in the trough type roller to a roller conveyor transition section and curved projection has wear. In 4, the cleaner and the conveyor belt friction. Cleaning device for conveyor belt caused by wear is usually homogeneous, but with a hard plate is used as a cleaning plate, if used properly, will be off the dirt outside the rubber cutting down. When the sweeper is sharp and conveyor entry of foreign matter, but also in the conveyor belt is a deep scars.
To understand the underlying causes of Conveyor Belt wear, so it can be used for reducing or avoiding conveyor belt wear, it would be better to extend the useful life of conveyor belt.
Leave a Reply
No Comment
Be the first to respond!