Send machines into operation. Finally, check the power supply voltage and the device does not exceed rated voltage difference between ± 5%.
    In the belt conveyor to run into, you must do the following:Acid Alkali Resistant Conveyor Belt

1. All will always be the power switch, inspection equipment into the power supply is normal and the power indicator is light. To normal to the next step.
2. All the power switch on each loop, check whether it is normal. The normal state as follows: equipment is not action, belt conveyor running light does not shine, inverter and other equipment of the power indicator light, inverter display panel shows normal.
3. In accordance with the order process to start all electrical equipment, electrical equipment on a normal boot and then the next one starts electrical equipment.
    Austrian Yu for our reference products are: screw conveyor, belt conveyor, non-axial screw conveyor … …

1, anti-corrosion
(1) agricultural machinery in the field work has been completed, the external dirt must be removed to clean up the work of institutions of seeds, fertilizers, pesticides and crop stubble, if necessary, clean water or oil. (2) cleaning the lubrication of parts and re-lubrication of all friction face, such as the Plowshare, plow wall, opener, hoe and shovel etc. must be wiped off the milk post-coated oil, preferably stickers in order to reduce contact with air opportunities. (Three) complex and sophisticated equipment is best placed in a cool, dry, ventilated indoor custody; right plow, harrow, suppression devices and other simple machines and tools, you can open custody, but on higher ground, dry, free from direct sunlight in place, preferably covered with scaffolding; any direct contact with the ground components, application support from wood or brick; off to re-coating of protective paint well. Acid Alkali Resistant Conveyor Belt

2, anti-rotten, rotten

(1) wooden parts due to the role of micro-organisms, as well as rain, wind, sun and the corrupt, rupture and deformation, effective storage method is to paint exterior wood paint, placed in a dry place, not by the day sun, rain. (2), textiles such as canvas conveyor belt, improper storage of easily rotten. These products should not be placed in the open, it should be removed and dried after cleaning, drying and can be stored in indoor pest control, anti-rodent place. Cotton Conveyor Belt

3, anti-aging

Rubber or plastic products due to oxygen in the air and the role of the sun’s ultraviolet light, easy to aging deterioration, so that rubber elasticity Security Door variation and easy to break. Custody of rubber parts, preferably coated with hot paraffin oil in the rubber surface of the shelf must be placed in the room, the paper of its cover, maintain ventilation, dry and free from direct sunlight.

4, anti-distortion conveyor system

Springs, transmission belt, a long arbor, tires and other parts due to long-term or placed undue force will produce plastic deformation, for this purpose shall be at the rack below the appropriate support, so that tires do not bear the load; mechanical compaction or pull all the The spring must be relaxed; remove the drive belt in the indoor safe custody; some parts removed for easy to deform, such as long arbor to be placed flat or vertical hang; other components removed, such as tires, lose custody when the kinds of tubes, etc. To prevent the accumulation of squeezing, pressure deformation.

Organizational units: Beijing Huamao-Link Exhibition Co., Ltd. Glass Door

    Exhibition Overview: Successful experience in a brilliant performance – The Fifth China International Coal Equipment and Mine Technical Equipment Exhibition Review –

    June 28, 2009 -30 in Beijing  China International Exhibition Center at the Fifth China International Coal and mining equipment, technology and equipment exhibition, from the United States, Sweden, United Kingdom, Germany, Austria, Czech Republic, Canada, Australia, Poland, Spain, China and Hong Kong SAR of more than 1000 exhibitors. In addition to the major manufacturers around the world on the same stage appearances, contests, there are from the United States, Britain, Germany, Australia, coal mining associations or associations to come to help out. China International Coal Equipment Exhibition has been successfully held five times its size from the initial 166 exhibitors 4725 square meters of exhibition space, expanding to this year’s 1018 exhibitors 43000 square meters of exhibition space, in the same show the median Ju, China’s largest exhibition; from the beginning was founded, CICEME on the choice of path of internationalization. Although at the beginning of road difficult, as the CICEME deeply concerned about the business, CICEME the burgeoning size. conveyor system  CICEME maintained at an annual rate of increase of 30%; became one of the world’s top five coal exhibitions. 2010, CICEME will reach 50000 square meters.

    The exhibition can be said of China’s coal mining, equipment procurement, production safety, technical exchanges unprecedented grand event.

    Exhibits range: 1, coal mining, coal companies, mining corporate image Pavilion; mining research institutes, colleges and high technologies, new patents achievements exhibition; resource-based cities and regions of Coal Investment Projects exhibition;

    2, mining equipment and coal mining machinery: mining \ Plows, mining machines, boring machines, excavators, coal mining complete sets of equipment, lifting machinery, hydraulic support, pillar, pre-stressed devices, anchor, emulsion pump and hose , mining machinery parts, the impact of drilling equipment, drill bits and carbide devices, loading and transportation equipment, shovels, mining automation equipment, mining equipment, metallurgy and storage and transportation, charging filling machinery, etc.;

    3, processing, and powder processing equipment: crushing machine, screening machine, separating machine, crushing and screening the joint equipment, sand washing machines, pounding pulp machines, high-performance dense machine, crusher, ball mill, grinding stripping machine, drying machine, mixing machines, grinding machines, grinding column machines, grinding machines, filter presses, flotation machines, centrifuges, calcining equipment, granulating equipment, weighing equipment, laboratory equipment, and coal-chemical equipment, etc.;

    4, coal washing and processing technology and technical equipment and mining energy saving, consumption reduction and environmental protection technology and equipment such as: coal washing, cleaning, storage, processing and conversion technology and equipment; coal-oil technology and equipment; coal gangue, coal slime processing and utilization technology and equipment; coal testing technology and equipment; mine environmental protection and comprehensive utilization of coal resources, technology and equipment, economizer etc.;

    5, infrastructure construction and upgrading technology and equipment, transportation equipment: drilling equipment, drilling equipment, mining pumps, wire rope, compressor, car rigs, anchor trolley, concrete jet, mining equipment and to enhance integrated protection devices, enhance the container, connected devices, anti-dropping device, sports protective devices, chains, roller, belt conveyor, conveyor belt, scraper, loader, scrapers, excavators, dump trucks and other non-rail equipment and rail transportation equipment; Mine with the winch, tub, heavy-duty transport vehicles for mining and other electronic weighing devices.

    6, coal mine safety, video surveillance, labor protection, mine rescue and disaster prevention equipment, etc.: all kinds of mine explosion-proof equipment and electrical appliances, gas alarm equipment, fans and ventilation testing equipment, mining and steel wire rope steel wire rope flaw detector, mine locomotives transportation monitoring system, mine sensors, respiratory protective equipment, mine escape / self-rescue equipment, rescue equipment, communications equipment, television monitoring equipment, mine safety monitoring system, mine information management systems, in addition to (down) dust equipment, underground coal mine drainage pipe network, mine cooling facilities, noise, protective equipment, underground lighting, safety signs, protective clothing, safety testing, monitoring, surveillance technology and equipment, fire warning systems, fire-fighting equipment, tools, fire vehicles, fire-fighting equipment, ventilation, drainage links and other technical equipment. Acid Alkali Resistant Conveyor Belt

    7, mechanical and electrical equipment and geological surveying equipment: all kinds of power equipment (diesel, gasoline engine), generator sets, motor, reducer, air compressors, nitrogen generator, oxygen machines and other compressed separation equipment, mobile power stations, coal power facilities , mining cable, explosion-proof motor, mining pumps, theodolite, leveling, range finder, prospecting machine, drilling machine, GPS positioning system, etc.;

    8, mine electrical, power supply, wires, cables and other equipment and general machinery equipment (transmission, air compressor, reducer, bearings, etc.), coal flammable, toxic, hazardous gas detection facilities; environmental protection equipment, rigging mine, coal mine automated management, mining explosion-proof flame-retardant wire & cable, batteries, frame-wire electric mining trucks and supporting electrical equipment, mining-related vehicles, engineering machinery, mining, consulting services, etc.;

    9, coal coking, gasification, liquefaction and coal-bed methane, gas and mining extraction, use and comprehensive management of waste, the use of technical equipment, etc.;

    10, coal mine of information automation equipment: financial clearing system, fixed asset management system, medical insurance management system, home management systems, production safety monitoring and control and corporate MIS integration and synthesis, etc.; all kinds of mining robots.

    11, mine emergency rescue equipment: monitoring and early warning, warning, prevention equipment; rescue tools and machinery; rescue aids and equipment; personal protective and rescue equipment; rescue medical equipment medicines; rescue communications equipment; rescue vehicles; rescue training, equipment and so on.

Flat conveyor for its flexibility, practicality has been widely used, such as electronic factories, toy factories, china conveyor belt manufacturer, shoe factories, metal factory and other enterprises where it can find a figure. But for his use and maintenance may not be how well a lot of friends, special knowledge in these areas will be launched with everyone to enjoy power. Steel Cord Conveyor Belt

Flat conveyor working principle and main functions: It’s what puts the workpiece conveyor belt to the next process, there is a motor to power through the inverter, or adjust to the desired speed ratio control the speed of work.

Plane Conveyor operation:

1, shut down before you check the conveyor belt as there is no harm obstacles. If so, you want to get rid of obstructions;
Acid Alkali Resistant Conveyor Belt
2, shut down before the power to observe whether it is normal, if necessary, deploy to conduct measurements to ensure that equipment needed for the normal voltage;

3, if upon inspection equipment is normal, you can shut down operation;

a, The inverter is used, please read the manual operation of the inverter.

b, with speed ratio control speed, the operation sequence is as follows.

2 shutdown sequence: Hop on the control box of the Main Power Switch (power indicator lights) → → starter button to start the rotation speed ratio control switch to “ON” position → slowly rotating speed control knob to the desired speed range. Their uniform operation; Do not use more than 1500rpm range.
Pipe Conveyor Belt
2 shutdown sequence: speed ratio control of the knob slowly rotating back to the “0″ position → to be flat conveyor will stop rotating speed ratio control switch to “OFF” position → turn off the startup switches and power master switch.

Plane Conveyor maintenance:

1 day, check the drive motor and speed reducer is an exception;

2 a day, checking belt is loose, and timely adjustments;

3, monthly check conveyor belt is stretched, and timely adjustments;

4, the monthly check drum rotation is flexible, and timely repair;

5, monthly check drive sprocket and the degree of matching chain, timely adjustments, and to the chain lubrication;

6 monthly swept along with the air gun control box dust, to prevent failures;

7, the first use reducer to be replaced after 100 hours of cleaning the internal gear oil, replaced with new oil after every 2500 hours and then replaced once;

8, a year to do a major maintenance, inspection accessories extent of damage.

Product Features: use cotton canvas, nylon canvas or polyester canvas to bring the core, with body good elasticity, good performance into a groove, use a small elongation. Use made of acid and alkali processing of materials covered by plastic, has a good resistance to chemical corrosion and good physical properties.

Uses: Suitable for chemical, fertilizer plants, paper mills and other factories, mines and transport companies, etc. contain acidic corrosive materials. Can also be used for seawater solar salt
Polyester Conveyor Belt:
(1) with a core material: NN100, NN150, NN200, NN250, NN300, NN350, NN400, NN450, NN500

EP100, EP150, EP200, EP250, EP300, EP350, EP400, EP450, EP500

(2) Bandwidth: 100mm-3000mm

(3) :1-10 layers fabric layer

(4) cover the glue: Face :1.5-8 .0 mm non-face :1.5-4 .5 mm

Conveyor belt according to the use of acid and alkali environment and the requirements are divided into many different specifications conveyor belts and models: According to the size of traffic divided by the width: B500 B600 B650 B800 B1000 B1200 B1400 B1600B1800 B2000 and other commonly used models (B on behalf of the width of the unit is mm).

Definition of conveyor Conveyor (Conveyor)

Conveyor line in a certain continuous delivery of materials Materials Handling Equipment, also known as the continuous conveyor.  Acid Alkali Resistant Conveyor Belt Conveyor can be horizontal, tilt and vertical transmission, but also the composition of space transmission lines, transmission lines are generally fixed. Conveyor transport capacity, long-distance, but also in the transportation process while completing a number of process operation, it is widely used.

Can be a belt conveyor system single conveyor can also be composed of multiple or composed of other transport equipment, horizontal or inclined transportation system to meet the different needs of arrangement of the operating line.

Abstract The fixed conveyor belt of cold seamless multi-layer, according to the use of rubber conveyor belt conveyor belt of the intensity of choice to seamlessly connect the length of the cold, as well as the determination of the direction of overlap.
Key words multi-layer rubber conveyor belt cold seamless connection
Countries of the world mining industry, as well as port terminals, a large set of transport of the stations were able to see as Rubber Conveyor Belt  the main means of transport of the rubber conveyor belt, which is why rubber
Rubber conveyor belt connected to become a major issue.
Rubber conveyor belt is divided into multi-layer, steel wire, pvc and other types, while the rubber conveyor belt of cold seamless connection only minor changes to adapt to multi-layer and a fixed length of rubber transmission
Send band, not suited to the mining industry face retractable rubber conveyor belt connection, the multi-layer rubber conveyor belt of cold seamless connection technology is the result of long-term practice of the German TIP TOR and summarized in.
A multi-layer rubber conveyor belt of cold seamless connectivity
Multi-layer rubber conveyor belt lap of the schematic shown in Figure 1.
Figure 1 Schematic diagram of overlap
1.1 Connection to determine the length of
Multi-purpose rubber conveyor rubber belt  conveyor belt manufacturer  according to the different layers of different options, if the lap length is the length of select waste materials, while the lap part of the short will
There is not enough bearing strength, or tear caused by the conveyor belt accident. Multi-layer rubber conveyor belt lap length and the intensity Acid Alkali Resistant Conveyor Belt of the selected related
Its calculation formula is as follows:
(1) 1! Additional lap size (joint length) Table 1.
(2) the width of the tape! 0.3 tilt cutting (about 16 “).
For example: conveyor belt width of 1000mm nominal strength 630/4750mm (lap use, see table) +300 mm (left oblique) = 105 (0 required tape length) left oblique Cutting shown in Figure 2.
Figure 2 Schematic diagram of the first layer of material under oblique woven fabric layer of 30mm Cutting tape ends when a 90-draw “of the CB baseline (see Figure 2) according to tape width! 0.3 = approximately 16″ draw oblique lines.
Table 1 Multi-rubber conveyor belt cold seamless connection method reference value of this size only at one end of the tape measure and a line of demarcation. Sometimes we need to cut down the multi-part conveyor intermediate, and then connect it up.
1.2 to replace a damaged tape
(1) conveyor belt on the release of tension, and tension with the tensioning device to tape together. In the two tensioning device marked oblique side of the middle and cut tape.
(2) to be replaced tape segment cut off parallel to the bevel edge (tape was on the shelf shore in advance).
(3) The calculation of the length of overlap. Before and after the connection to connect some length (see table)! 2 + is replaced by the length of the segment of the tape + tape width! 0.3 oblique segment.