Conveyor Belt

Face conveyor operation and maintenance of

Face conveyor operation and maintenance of 
 
The use of flat conveyor
Flat conveyor lines, etc., commonly known.

Flat conveyor for its flexibility, practicality has been widely used, such as electronic factories, toy factories, china conveyor belt manufacturer, shoe factories, metal factory and other enterprises where it can find a figure. But for his use and maintenance may not be how well a lot of friends, special knowledge in these areas will be launched with everyone to enjoy power. Steel Cord Conveyor Belt

Flat conveyor working principle and main functions: It’s what puts the workpiece conveyor belt to the next process, there is a motor to power through the inverter, or adjust to the desired speed ratio control the speed of work.

Plane Conveyor operation:

1, shut down before you check the conveyor belt as there is no harm obstacles. If so, you want to get rid of obstructions;
Acid Alkali Resistant Conveyor Belt
2, shut down before the power to observe whether it is normal, if necessary, deploy to conduct measurements to ensure that equipment needed for the normal voltage;

3, if upon inspection equipment is normal, you can shut down operation;

a, The inverter is used, please read the manual operation of the inverter.

b, with speed ratio control speed, the operation sequence is as follows.

2 shutdown sequence: Hop on the control box of the Main Power Switch (power indicator lights) → → starter button to start the rotation speed ratio control switch to “ON” position → slowly rotating speed control knob to the desired speed range. Their uniform operation; Do not use more than 1500rpm range.
Pipe Conveyor Belt
2 shutdown sequence: speed ratio control of the knob slowly rotating back to the “0″ position → to be flat conveyor will stop rotating speed ratio control switch to “OFF” position → turn off the startup switches and power master switch.

Plane Conveyor maintenance:

1 day, check the drive motor and speed reducer is an exception;

2 a day, checking belt is loose, and timely adjustments;

3, monthly check conveyor belt is stretched, and timely adjustments;

4, the monthly check drum rotation is flexible, and timely repair;

5, monthly check drive sprocket and the degree of matching chain, timely adjustments, and to the chain lubrication;

6 monthly swept along with the air gun control box dust, to prevent failures;

7, the first use reducer to be replaced after 100 hours of cleaning the internal gear oil, replaced with new oil after every 2500 hours and then replaced once;

8, a year to do a major maintenance, inspection accessories extent of damage.