Posts Tagged → conveyor belt manufacturer
Bao Tong with industry: highlights the highlights of the three major investment
Founded in 2000, Wuxi Po passband Industry Co., Ltd. (hereinafter referred to as “treasure pass-band industry”) is a professional engaged in various high-strength rubber conveyor belt R & D, production, sales and service business. The company mainly produces all kinds of high temperature, flame retardant, acid and alkali, such as the performance of anti-tear fabric core conveyor belt, steel cord conveyor belt and a variety of specialty products, are widely used in iron and steel, cement, coal, electricity, ports and chemical industries, as well as export markets. Company’s 2008 sales to 2.5 billion, heat resistant conveyor belt (withstand temperatures over 125 degrees Celsius) areas of outstanding technological advantages, the market share of 30%, living in the industry first.
conveyor belts
As a second batch of landing one of the GEM, Po pass-band industry in the Shenzhen Stock Exchange a debut attracted the attention of many investors, while the Po-pass-band active in the industry’s recent performance at its domestic rubber conveyor belt leading business segments earned the status of the full face. Industry analysis, company “custom manufacturing” business model, leading-edge technology level and quality of client resources have become a powerful guarantee for business growth.
”Customization” to enhance profitability
Other enterprises with the industry “order production” or “first post-sales” conveyor belt manufacturer business model is different from Baotong worked out with industry, “customization” mode, and constantly growing this model a sound and mature. The so-called “custom manufacturing” is a company under specific operating conditions of each client parameters and personalized needs conducted conveyor formula design, structural design and manufacturing process design, with quick, accurate, appropriate and economical way to provide customers with personalized The conveyor belt operation program, a comprehensive operational requirements to meet the customer premise to reach customers cost economy. This mode of operation requires not only have the formula companies design, structure design and process design expertise, but also the need for efficient operational system and a sophisticated management system, its substantive content is
To mobilize all the resources of enterprises, to quick, accurate, applicable and economical manner to provide customers with personalized belt operations solutions.
Through the use of “custom manufacturing” business model, the company has successfully implemented a high-level differences in strategy. An advanced business model and efficient business operation system in all-round drive the company to continuous improvement of cost-effective to create value for customers, while significantly enhancing the company’s profitability, has brought good returns on assets.
In recent years, Bao Tong with industry sales revenue, profit levels continue to grow, in 2008 the company’s per-capita income, per capita profits and assets of the three indicators of profitability of domestic industry were ranked first (including foreign-invested enterprises).
” ‘Customization’ has increased the conveyor belt in the high-end product market entry barriers, the competitive environment of the industry, purification and health are very favorable. This model helps companies come from behind in the high-temperature conveyor belt product areas, but also will help the company Mine flame-retardant conveyor belt with the laminated products in the market to expand. “company chairman and general manager, said package Zhifang.
High-quality products to ensure market share
Bao Tong with industry, the continued emphasis on product quality, enhance, therefore attaches great importance to R & D investment and product positioning in the “new, hot, unique, fine,” through technology and product quality differentiation to participate in market competition, the pursuit of profitable sustainable growth. Polyester Conveyor Belt
Through continuous R & D investment and technological improvements, the company gradually heat resistant conveyor belt, high-strength conveyor belt, coal mine areas with laminated flame-retardant conveyor belt to establish its own products and technological superiority.
Quality department of the company’s technology is superior to the national standard of the company’s quality standard system, to maintain a high level of product differentiation. The company has passed ISO9001 quality management system certification, ISO14001 environmental management system certification, OHSAS18001 occupational health and safety management system certification and ISO10012 measurement of management system certification.
Why is easy to crack belt connector, disconnect?
Why is easy to crack belt connector, disconnect?
Conveyor belt at the strength of joints than normal with lower body strength. Generally connected by mechanical means, the joint strength can only be achieved with 40-50% body strength, relatively good quality, conveyor belt manufacturer cold-glue method, the joint strength can reach 60-70%, while the hot glue joint strength can reach 80-90% ( joint approach is correct, no quality defects). As the strength of joints is relatively low, if the bonding Polyester Conveyor Belt method is not correct, the joint strength will be even lower, such as surgery, injured, under a layer of cloth when polishing, grinding over-lap length is not enough, the number of steps is not enough glue joints The poor performance of rubber, or has expired since the sulfur, over-polished steel wire rope, wire rope rusty and so on, the strength of joints will be greatly reduced, in use, prone to the phenomenon of broken joints.
In addition, the conveyor belt if you do not use sealing glue, or glue joints in the wrong direction, the joints prone to cracking (surface plastic parts).
Rubber conveyor belt of cold seamless connectivity
Rubber conveyor belt of cold seamless connectivity
Multi-layer rubber conveyor belt of cold seamless connectivity
Abstract The fixed conveyor belt of cold seamless multi-layer, according to the use of rubber conveyor belt conveyor belt of the intensity of choice to seamlessly connect the length of the cold, as well as the determination of the direction of overlap.
Key words multi-layer rubber conveyor belt cold seamless connection
Countries of the world mining industry, as well as port terminals, a large set of transport of the stations were able to see as Rubber Conveyor Belt the main means of transport of the rubber conveyor belt, which is why rubber
Rubber conveyor belt connected to become a major issue.
Rubber conveyor belt is divided into multi-layer, steel wire, pvc and other types, while the rubber conveyor belt of cold seamless connection only minor changes to adapt to multi-layer and a fixed length of rubber transmission
Send band, not suited to the mining industry face retractable rubber conveyor belt connection, the multi-layer rubber conveyor belt of cold seamless connection technology is the result of long-term practice of the German TIP TOR and summarized in.
A multi-layer rubber conveyor belt of cold seamless connectivity
Multi-layer rubber conveyor belt lap of the schematic shown in Figure 1.
Figure 1 Schematic diagram of overlap
1.1 Connection to determine the length of
Multi-purpose rubber conveyor rubber belt conveyor belt manufacturer according to the different layers of different options, if the lap length is the length of select waste materials, while the lap part of the short will
There is not enough bearing strength, or tear caused by the conveyor belt accident. Multi-layer rubber conveyor belt lap length and the intensity Acid Alkali Resistant Conveyor Belt of the selected related
Its calculation formula is as follows:
(1) 1! Additional lap size (joint length) Table 1.
(2) the width of the tape! 0.3 tilt cutting (about 16 “).
For example: conveyor belt width of 1000mm nominal strength 630/4750mm (lap use, see table) +300 mm (left oblique) = 105 (0 required tape length) left oblique Cutting shown in Figure 2.
Figure 2 Schematic diagram of the first layer of material under oblique woven fabric layer of 30mm Cutting tape ends when a 90-draw “of the CB baseline (see Figure 2) according to tape width! 0.3 = approximately 16″ draw oblique lines.
Table 1 Multi-rubber conveyor belt cold seamless connection method reference value of this size only at one end of the tape measure and a line of demarcation. Sometimes we need to cut down the multi-part conveyor intermediate, and then connect it up.
1.2 to replace a damaged tape
(1) conveyor belt on the release of tension, and tension with the tensioning device to tape together. In the two tensioning device marked oblique side of the middle and cut tape.
(2) to be replaced tape segment cut off parallel to the bevel edge (tape was on the shelf shore in advance).
(3) The calculation of the length of overlap. Before and after the connection to connect some length (see table)! 2 + is replaced by the length of the segment of the tape + tape width! 0.3 oblique segment.
Recent Comments