Posts Tagged → conveyor belt system
Conveyor Belts Parts
On Industry conveyor belt system use for moving part/product from one place to another place very effective and efficient. A conveyor belt system is a mechanical tools/device with batteries or electricity power made of a continuous loop . The conveyor belts part operate simultaneously with other parts to move a belt conveyor in a certain direction.
There are list Conveyor Belts Parts:
Stub Idlers – Conveyor Belts Parts
Stub Idlers is a tiny cylindrical devices made from rubber or metal in conveyors system. Stub Idlers position in tight areas of a belt conveyor where conveyor pulleys or wheels cannot fit. Stub idlers keep the belts moving at all times and operate similarly to conveyor pulleys in a circular motion and prevent the belt from sagging. Stub Idlers can come in different sizes.
Conveyor Wheels – Conveyor Belts Parts
Conveyor belt system movement can generated from Conveyor Wheels and pulley working together to create energy. Conveyor wheels have hollow centers with stabilizing rods going through the center/middle. Two conveyor wheels are attached to the rod and are positioned on opposite ends of the belt conveyor to generate even spin. Smaller conveyor wheels(guide wheels) are stationed throughout the Conveyor Belt. Chains, Guide wheels guide cords, wires and other conveyor components.
Conveyor Belt – Conveyor Belts Parts
Conveyor belts made from silicone or rubber , depending on product type being transport and to withstand extreme temperatures. Mostly Conveyor belts are less than 1 inch thick, so the Conveyor belts movement is smooth with other conveyor components. The two conveyor pulleys need to rotate simultaneously to help the Conveyor belts along its designated route.
Conveyor Pulleys – Conveyor Belts Parts
Conveyor pulleys consist of cylindrical devices that move the belt conveyor along its designated route. Conveyor pulleys can be made in different ways, depending on weight load the conveyor type is meant to carry. Elevator pulleys(Conveyor pulleys type) are smooth around the whole surface. The outside edge sits flush against the center/middle bearings. While Conveyor pulleys is operating, the pulley adds pressure to the belt conveyor, which causes friction and produces a pull. Wing pulleys or spiral(Conveyor Belts Parts) are designed to pull conveyor system chains or tracks and are commonly used for industrial conveyors.
Siemens drives world?s longest conveyor belt
Erlangen, July 20, 2007 – Siemens Industrial Solutions and Services (I & S) has equipped a 19 km long conveyor belt system with drive systems for Alcoa Inc., based in Texas (USA). Siemens systems offer precise methods of control, can be quickly and flexibly to different loads and are highly energyefficient.
Alcoa is a leader in aluminum production. The plant in Rockdale, Texas, needs a constant supply of lignite energy to maintain production throughout the day. To this end, a conveyor belt system transports the necessary coal from the mine to Rockdale Three Oaks, a distance of 32 kilometers.
The critical section in the middle of the road transport, which is approximately 19 kilometers long, is bridged with the longest belt conveyor unique in the world, parts of which must pass through a field uneven. This link between the point where the material comes from the open pit mine and the place from which is then taken to the power plant.
The belt system was equipped with a solution of R & S With Simine product family, which has strong systems and efficient energy transmission. Five drivessystems SIMOVERT MASTERDRIVES VC type, each with 556 kW have been installed. The units are strategically placed so that the completesystem can be optimally operated, stopped and started up. A unit has been installed at the loading point, two units in the middle of the road and two at the point of discharge.
The fiber optic cables between the conveyor belt stations enable the operator to individually control the belt speed, for example by slowing down when the load is too heavy, accelerate or stop quickly. The belt controlsystem prevents oscillations of the belt during starting and stopping. The system was adapted to the following loading conditions: no load, partial load and full load. This method of operation uses much less energy than conventional belt drive uncontrolled.
Moreover, the protection of mechanical components. Round the top of the clock availability with low operating costs has been reached. The units are first powered up to ten percent of the total speed and, after a plateau of about 60 to 120 seconds, thesystem accelerates the rate of 100 per cent target.
Siemens Industrial Solutions and Services Group (I & S) is the integrator of systems and solutions for industrial service providers and global infrastructure services for the plant and projects business covering planning, installation, operation and lifecycle. I & S uses its own products and systems and process technologies in order to enhance productivity and improve competitiveness of companies in the sectors of metallurgy, water treatment, pulp and paper, oil and gas, marine engineering, mining open sky, airport logistics, postal automation, intelligent traffic systems and industrial services. In fiscal 2006 (September 30) I & S employed a total of 36,200 people worldwide and achieved total sales of 8.819 billion, according to U.S. GAAP.
Use flame-retardant conveyor belt instead of wire rope conveyor belt at the time?
Use flame-retardant conveyor belts instead of wire rope conveyor belt at the time?
With the rapid development of the coal industry, underground roadway in Coal by the growing strength of selected adhesive tape. Bai special to you for your choice of flame-retardant conveyor belt system conveyor belt to replace the recommendations of rope, fire-retardant conveyor belt conveyor belt, compared with the traditional steel wire rope has the following characteristics:
1, with a body of light, fire-retardant conveyor belt to be lighter than comparable steel core is much more power consumption is also low. The advantage of the long transmission system is very important. So it can be allowed to use a smaller power-driven, and can be a long-term energy conservation. Patterned Conveyor Belt
2, flame-retardant conveyor belt has good flexibility, with a thin body, conveyor rollers can choose a smaller diameter.
3, flame-retardant conveyor belt zonal high strength, (MT668-1997 standard, without limiting the zonal intensity), high-performance longitudinal tear.
4, the joint flexible and fast way, you can use buckle connection, but also can be used bonding methods. Joints, high strength, generally keeping the original with a nominal tensile strength of 65-90%, the replacement, repair easily.
5, flame-retardant plastic conveyor belt cover wear resistance, tear strength, excellent security features such as flame-retardant anti-static, and the cover rubber thickness and shape can be arbitrary choice.
6, flame-retardant conveyor belt conveyor belt wire one-time purchase cost is lower than is conducive to a liquidity problem.
Recent Comments