Conveyor Belt

Optional belt Required

Optional Belt:

1, accurately specify the name of the material nature. Especially particle size, temperature, can have acid, alkali and other corrosive and special requirements. Heat-resistant Conveyor Belt, such as the use of temperature to show.

2, indicating the specific applications, requirements specifications (width, length, number of layers, thickness, etc.), especially the use of temperature and heat-resistant Conveyor Belt volume size.

Storage:

1, the Conveyor Belt in the transport and storage, should be kept clean to avoid direct sunlight or rain and snow soaked shower, prevent acid, alkali, oils, organic solvents and other substances in contact, and one meter away from the heating device.

2, the conveyor belt when the warehouse storage temperature should maintain a 18-40 ℃, relative humidity should be maintained at 50 – 80%.

3, the conveyor belt during storage, the product must be placed into a roll, not fold, flip a conveyor belt should be on a quarterly basis.

Belt use:

1, to prevent the conveyor belt load to start.

2, the conveyor belt deviation occurs, it is timely to take measures to correct it.

3, different types of layers specifications should not be connected with the use of conveyor belts, the joint preferably bonding method.

4, the conveyor belt of the type, structure, size, number of storeys shall use reasonable choice.

5, the conveyor belt speed generally not more than 2.5m / s, block degree, abrasive materials and the use of large fixed-pear low discharge devices should be used.

6, the roller conveyor belt drive pulley diameter and the relationship between fabric layers, the drive roller, bend the supporting roller and the roller groove angle of the transport requirements of the design requirements should be based on reasonable selection.

7, to the expected direction, the direction should be along the conveyor, the conveyor reduces material impact on the whereabouts of the chute should be adopted, reducing the distance gap materials; conveyor belt by the material section, should be shortened and the use of the buffer distance between rollers of roller For the leakage, belt conform to appropriate block of soft material plate, so as not to stall plate mark, scratch the surface of the conveyor belt.

8, the conveyor in use, the lack of any roller is necessary to add and repair; roller covered by material, resulting in rotation not working, to prevent leakage of material between the cards in the drum and the belt, pay attention to the lubrication of conveyor belt moving parts, But not oil belt.

9, to avoid the conveyor belt being rack, post or block material block to prevent the misfortune to scratch the rip, when the local damage that conveyor belt, rayon and timely application of patches, so as not to expand.

Steep sidewall conveyor belt and Selection Caution

1, steep wall storage and use of conveyor belt and heat conveyor belt with the same common.

2, inclined conveyor belt more than 70 degree angle wall should be covered with, (with the benefit of using the cover to prevent leakage of material damage on the base band; but also can increase the volume of material.)

3, inclined ribs on the roller conveyor belt requirements required is much higher than that, if the case of the same model with a flat belt use than the larger cylinder models.

4, baseband

Corrugated sidewall conveyor belt is mainly exposed to rally the base, but in the course of its lateral stiffness and the effect of the use of performance plays a big role. Such as the conveyor belt rigidity is too small, the transverse deformation of the conveyor belt, causing phenomena such as scattering materials. (Such as the selection of CC-56 cotton canvas core conveyor belt, tearing strength 56N/mm, at least 6 or more layers of the core layer – with 6 layers, thickness = 4.5mm plastic cover over the next thickness = 1.5mm plastic cover over .)

5, divisions, skirts

Skirts in the choice of partition should first consider the throughput conveyors, such as: skirt height, baffle spacing, the size of the effective bandwidth.