Posts Tagged → Steel Mesh Conveyor Belt
Belt Conveyor protection
belt conveyor system protection
(1) belt conveyor speed of protection.
If the conveyor malfunction, such as the motor burned, gravel production technology, mechanical transmission part of the damage, belt or chain pull off, belts slipping and so on, sand and gravel production technology, installed in the conveyor of the incidents on the passive parts of the magnetic sensor SG control switch can not be closed or not
Can be closed when the normal speed control system will be characterized by the time after a certain time delay counter, the sand and gravel production technology, the speed protection circuit works, so that the implementation of part of the action, cut off the motor power supply, in order to avoid accidents to expand.Oil Resistant Conveyor Belt
(2) mine conveyor Temperature Protection
Roller and belt conveyor belt friction to temperature overrun, the sand and gravel production technology, close to the detection roller installed device (transmitter) the issue of over-temperature signal, the receiver receiving the signal, via 3s delay to allow the Executive part of the action, cut off the electric motor powered conveyor Auto-stop turn, play a role in temperature protection.Steel Mesh Conveyor Belt
Rope belt use?
Rope belt use?
conveyor belts widely used, mostly for iron and steel, metallurgy, coal, cement, power generation, fertilizer, grain storage, port and other industries. Area wide, Qingdao is famous for the production of conveyor belt area, Austria-yu production of conveyor belt in Qingdao, account for a large proportion of the market. china conveyor belt
In these industrial sectors with an indispensable, irreplaceable role to play. Steel wire rope conveyor belt in the industrial sectors is unavoidable, and it wide range of application, high-quality and good price. Wire rope conveyor belt tensile strength, long life, use the elongation is small, into a good groove, scratch-resistant Qu
Good, suitable for long distance, large capacity, high-speed transport of materials. Buy high-quality conveyor belt on the election Qingdao.
Steel Cord Conveyor Belt are generally plastic, rope, rubber covered from top to bottom and side rubber composition.
Seven shares of steel wire rope type, three type-style and so on. The basic unit is a steel wire rope, usually galvanized high-carbon steel material. Steel wire strand composed of, the composition of rope strands. In a tape in the left and right twist rope alternately assigned amount, half of each. As the wire rope strength range
Wide, high strength, elongation is small, tape carrying capacity, into a good groove, the joint, high strength, long service life, is currently the most representative high-strength conveyor belt, suitable for long distance, large capacity, high – the speed of modern transportation needs.
Steel cord conveyor belt marks Example: 1402200St31508 +8 H said that the zone length 140m, width of the standard 2200mm, strength specifications 3150N/mm, the thickness of the upper and lower cover are 8mm, the performance rating for a strong cover designated crack working conditions.
Dynamic impact steel cord conveyor belt and anti-tear properties, the development of anti-tear steel cord conveyor belt. Such conveyor belt under the specified test conditions, must be able to include the crack resistance and impact strength of breakdown, etc., anti-tear performance tests.
Mainly uses open-ended Steel Mesh Conveyor Belt , so that better penetration of rubber into the steel cord into the gap can be avoided both enhance the capacity of steel corrosion, but also to improve their adhesive strength between the rubber to improve dynamic fatigue-resistant conveyor belt performance and extended product life , But also for the general users to reduce the expenditure and manpower, reducing fatigue.
the joint custody of Use rubber
1. Rubber material storage time and storage temperature:
Rubber production is used as soon as possible after the adhesive tape in order to achieve the best results, rubber storage period of three months, the best bonding period of one month, the general storage temperature to 8 ~ 18 ℃ is appropriate.
2. Plastic material storage and stacking: china conveyor belt manufacturer
After the bonding adhesive material is mixing raw rubber material, with a large plastic, rubber molecules are not chemically cross-linked, comprehensive mechanical properties can not be formed, thus piling up of raw rubber material can be stored, but should be placed on each roll formed flat wood on the ground or to minimize the rubber deformed by extrusion to prevent the adhesive between the adhesive, such as the storage time is longer, should be a week (simple) flipping once, to prevent the deformation of a larger compound.
3. Overhaul the process should pay attention to Steel Cord Conveyor Belt
1) compound in the bonding process, pay attention to hygiene to avoid and dust mixed with other impurities affecting the adhesion properties of rubber.
2) The film volume in the release process, should try to pull Unwinding of light in order to avoid film thinning, filling insufficient curing time affect the quality of bonding. Steel Mesh Conveyor Belt
3) The construction process should be accrued daily workload to determine the amount of rubber, not all at the scene, resulting in other losses.
Recent Comments